Feature Product
- Special settings for the best night vision mode without IR. Completely sealed with IP-67 grade waterproof & dustproof, works perfectly in harsh conditions - rain, snow, countless car washes, etc.
- Wide viewing angle of 170° for maximum visibility behind the vehicle. Unique distance guide lines on the image repeat objects distortion and help to control the distance to obstacles from any angle.
- Compatible with Gazer CAxxx mounts - to install the camera instead of license plate light. Find a special CA bracket for your car via gazer.com (more than 300 types of Gazer mount can be installed in more than 3000 cars).
- Camera connector is round with diameter of only 0.2 inch. This allows to lay a cable and to connect a camera even through a very small vehicle hole.
- Special power cable with relay block and LC-filter included. Can be plug&play connected with car monitor Gazer MC125/Gazer MC135 - have RCA video connector and power supply connector for monitor. All need cables included, total length of them is 30.5 ft.
Description
Gazer Camera fits all vehicle types and provides the possibility to control the distance to obstacles behind your car. When you put your car in reverse, camera will automatically switch on, allowing you to see all for best defense against damage to your vehicle. It uses 1/4" Super CMOS sensor specially configured for operation in low light conditions - have no "blue" noise on image, very clear and bright image at night, in poor visibility, in rain or fog. Camera has wide viewing angle of 170° and a unique guide lines that repeat all geometric distortion of real objects on the image. Camera is compatible with Gazer CAxxx mounts and can be installed instead of license plate light. Gazer mounts are identical with original license plate lights and use the original lamp of license plate light or LED backlight with 2700K warm light. To find suitable CA bracket for your car please visit website gazer.com. Camera installation is easy and considered. The control and commutation unit for plug&pluy installation included. It consists with special power cable with relay block and LC-filter, commutation unit, wiring (26.2 ft), additional cable with power jack and RCA video out - to plug&play monitor connection. Due to the considered connection, there are no conflicts with the vehicle's electrical system when using the camera.
Specifications:
Sensor CMOS 1/4" (720x480)
Resolution 500 TVL
Video signal format NTSC
Angle of view 170ยบ
Sensitivity 0.1 Lux
Signal/noise ratio › 46 dB
Mirror image
Guide lines on the image
Supply voltage DC 12V
Current consumption 85 mA
Protection level IP67
Operating temperature -30° - +70° C
Package Included:
1x Backup Camera
1x Universal Mount
1x Control and Commutation Unit
User Manual
0 komentar:
Posting Komentar