Product Features:
- Four 180 degrees ultra wide fish-eye cameras, Newly upgraded metal camera, very solid, waterproof and dust-proof. Side camera can adjust the angle of multi-direction.
- Seamless video merging based on Quad-core CPU and hardware high efficiency acceleration engine.
- Arbitrary and dynamic 3D mode view angle switching for better surrounding environment observation
- Independent Fish-eye calibration parameter and algorithm for each camera.
- Pixel statistic engine for brightness balance among four channels real-time outside cameras.
- 3D video de-interlacing and noise reduction technology for CVBS signal decoding.
- Support alternative recording media for TF card.
- The simplest calibration steps with calibration cloth,and system applicable for almost all types of vehicle which including Buses, Trucks, Lorries, Limousines, Tank and even Jumbo Jets. Typical length of the vehicle is 5.5m, 6.5m.
- High video recording resolution up to 1080p
- OE quality for main chip-set with well protected circuit and devices in order to achieve the best system performance and stability.
!!!If you want the 3D 360 DEGREE VIEW can with the dynamic parking lines , it need add $25 for this function, and also connector us, Notes:
- First, the car must have a display screen
- Second, the original car screen as long as has the rear view image, 90 percent are to be decoders, whether it is a domestic car or joint venture car, before loading to confirm whether the customer has a decoder, if not, then the car can\'t install this 360 degree view car camera system
- Third, if the customer\'s car navigation is added later, this 360 degree view car camera system can be installed
How to get 360 degree,it need to connect the following cables:
1. yellow cable is connected to 12V constant electric,
2. red cable is connected to ACC,
3. black cable is connected to grounding wire,
4. blue cable is connected to reversing detection wire,
5. yellow RCA is connected to video wire,
6. the white trigger wire of left view, right view and rear view extension wire----
white trigger wire on left view extension wire is connected to the positive pole of left turn light, white trigger wire on right view extension wire is connected to the positive pole of right turn light, the white trigger wire of rear view extension wire is connected to the positive pole of back-up light.
All cables are connected correctly and it will be OK to use 360 degree.
0 komentar:
Posting Komentar