Feature Product
- Save by connecting aftermarket car rear view camera without a video interface
- Compatible with Mazda, equipped with MZD Connect monitors
- No risk of voiding car warranty as the cable offers simple Plug&Play connection without the need to cut car wiring
- Image from the camera appears on the screen automatically when you switch to reverse
- Continue using all of the OEM functions as you did before connecting the cable
Description
This cable allows you to connect rear view cameras in Mazda cars with OEM MZD Connect multimedia system . The cable offers Plug&Play installation of aftermarket cameras without damaging the OEM wiring.
Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 28 pin socket (marked red on the picture). After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
Note! Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
Compatibility
System:
MZD Connect with OEM navigation system
MZD Connect without OEM navigation system
BOSE or other manufacturer audio system
Mazda Models:
Mazda 2 2014-
Mazda 3 2014-
Mazda 3 Sedan 2014-
Mazda 6 2015-
Mazda CX-3 2014-
Mazda CX-4 2016-
Mazda CX-5 2015-
Mazda CX-7 2017-
Mazda CX-9 2015-
Mazda MX-5* 2014-
Mazda Miata* 2016-
Additional compatibility conditions:
7 " OEM monitor
*Camera will most probably have to be powered up directly from the ACC line as the head unit does not output the required +6 V.
0 komentar:
Posting Komentar