CMOS Waterproof Car License Plate Frame Rear View Camera 170 Degree Night Vision Parking Reversing Assistance Wide Angle with 8 LED

Feature Product

• -Night Vision LED: extends visibility in low light condition, ensuring complete safety even at full darkness. Color CMOS (PC1030, 656*492) imager, with 8 Infrared LED
• - Zinc metal license plate frame camera with IP-67 grade waterproof and dustproof, works well in atrocious weather.
• No Blind Area: This backup camera equipped with adjustable Lens with 170 degree wide viewing angle.There will have no blind area,it helps you avoid possible obstacles in time when reversing.Safe on the road.
• Super Waterproof: The standard is up to IP68 ,you do not have to worry any rain or dust,very durable. Built-in grid lines as a trapezoid electronic ruler, 3 ft measured by every interval, keeps you much more secure while reversing.
• - Mounts easily on the license plate with the existing screws, ideal for most vehicles that use a standard U.S. or Canada license plate.

Description

Specifications:
Image Sensor: Color CMOS PC1030
TV System: NTSC
Horizontal Resolution: 420 TV lines
Effective Pixels: NTSC 510 x 496 pixels
Minimum Illumination: 0 lux with IR on
Lens Angle: 170 degree
Video Output: RCA connector, 1.0 V p-p, 75 ohm
White Balance: Auto
Power: DC 12V
Current Consumption: 60 mA
Dimension: 310 x 161 x 27 mm
Installation:
- It can be easily installed on the license plate, compatible with standard U.S. or Canada license plates.
- Clean the camera installation surface.
- Mount the camera on the license plate.
- Fix the camera temporarily with the existing screws.
- Connect the camera to the power and monitor.
- Change the shift lever to the R (Reverse) range to view the rear image of the vehicle.
- Use the L-wrench to adjust the camera for a best viewing angle.
- Tighten the retaining hex screws firmly, fix the camera.
Note:
- This camera has a mirror image.
- This camera only supports NTSC video system, so please make sure your monitor supports NTSC video system before you buy it.
- The camera switch is controlled by the reverse gear shift.
- The instructions are for reference only.
Package Weight : 615 G / 21.69 Ounces
Package Dimensions (L*W*H) : 330*167*43 MM / 12.99*6.57*1.69 Inches Retail Packaging: Yes, Colored Box

Package Include:
1 x License Plate Frame Car Rear View Camera
1 x Audio Cable
1 x Power Cable
1 x Wrench