PeachFYE 2.4G Wireless Module Video Receiver/Transmitter Kit for Car DVD Monitor WIFI Rear View Camera Reverse Backup 7 IR Night Vision

Feature Product

• This 2.4G Wireless Color Video Transmitter Receiver are for your vehicle's rearview camera, allowing you to transform rearview car camera signal to the LCD display monitor by the 2.4G wireless.
• Easy to install and operate. Wireless RCA video receiver/transmitter; avoid complicated wiring, to be used with in-car monitor, head unit, DVD player and camera, etc.Simply connect the rearview camera with the transmitter and the car LCD display with the receiver; you will have a fully functioning wireless rearview camera.
• Receiver/transmitter frequency: 2370MHz. The receiver and transmitter can be powered by any DC 12V vehicles. Wireless Color Video Transmitter Receiver Kit is a great addition to your car.
• Av in/out: PAL/NTSC Composite video signal, RCA Jack. Receiver/transmitter distance: 100m (in jam-free open areas)
• Mainly be used for wireless connection on light vehicles for video output to monitor, DVD player, camera, and MP5 etc.

Description

Item's color might be different from the picture because of the aberration.
An advanced wireless module that enables normal reverse camera to become wireless!
Wireless 2.4GHz transmitter/receiver set (12V for vehicle installation)
Work range: up to about 50m(Hollowness)
Fit all RCA composite video connections
Input: DC 9-14V
Adjust the angle: 170
Video output: PAL / NTSC composite video signal
Transmitter/Receiver cable length: approx. 1.3m

Package Including:
1 x Wireless Transmitter
1 x Wireless Receiver

Notes:

This set is not suit for bus or truck.
And this module is for in-car monitor or DVD,not for GPS.
How to Install a Camera with the Wireless Module?

1.Take out your stock license plate light at the back of your car.
2.Fix the camera to where the stock license plate light was.
3.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
4.Connect the wireless module (transmitter) to your camera via the two cables - one plug for AV output and one plug for power.
5.Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative.
6.Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
7.Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative.
8.You will see the images on monitor or DVD when your car is in reverse shift.