Feature Product
- Digital color LED display (digital and light) reversing radar reversing kit, and our rear parking sensor can observe three sets of data streams simultaneously. Adapted to 12-24V automotive electrical system
- 4 sensor: The reversing sensor system is mounted on the back cover of the car. It is equipped with 4 sensor systems to prevent freezing and rain. When there is an obstacle or hazard 0-2.5M, the sensor will emit a BIBI sound and the distance will be based on the obstacle distance. alarm.
- High quality sensor system with protection circuitry to avoid overheating or overload. Reversing backup radar helps to avoid dangerous and costly collisions behind the wheels and helps provide greater safety for passengers, family members and family members who happen to move around the vehicle.
- Easy to install: You can easily drill holes in the car bumper to install the sensor. Make sure the 4 sensors are fully horizontally installed.
- Please note: Please use the dedicated cable provided immediately for the continuity between the components. Care should be taken during installation to prevent flattening, puncture, cutting, and extension of each cable. Please install and maintain the system when the power is off.
Description
Bibi three-step tone.
Rated working voltage: DC 12-24V
Operating voltage range: DC 10V ~ 28V
Working current: 20mA ~ 500mA
Radar detection distance: 0.3 ~ 3.0m
Ultrasonic frequency: 38kHz/40kHz
Host operating temperature: -20 ° C ~ +85 ° C
Buzzer volume: 65dB
Probe installation method: drilling
Probe diameter: 22mm
Display mode: LED crescent display
Standard configuration
One 24V waterproof radar host, four probes, one power cord, one small crescent display, one hole opener, and one manual.
0 komentar:
Posting Komentar