Car Rear View Camera Waterproof HD Night Vison Reverse Parking CCD Chip Backup Camera for Toyota RAV4 Vanguard

Feature Product

• CCD Rear View Reverse Backup Parking Camera and 6M RCA Interface Video Calble and 1.5M DC Power Cable
• Perfect Replacement Do Not Need to Modify, Do Not Need to Damage the Original Car Appearance
• 150 Super Wide Angle Lens, Waterproof, Dust-proof, Anti-fog, Shock-proof
• Better Help Your Parking, In the Screen, You Could See the Back Cars, Obstacles or Children
• If You Install Camera for the First Time.It's HIGHLY RECOMMENDED to Check the Sizes of the Camera First and Make A Comparison with Your Car Trunk Handle or License Plate Lamp Case

Description

Specification:
Image Sensor: CCD 7070
TV system: NTSC
Horizontal Resolution: 480 TV lines
Effective Pixels: PAL:628(H) * 582(V)
NTSC:510(H) * 492(V)
View Angle: 150 degree
S/N Ratio: >48dB
Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds
Video Output: 1.0Vpp, 75Ohm
White Balance: Auto
Power: DC 12V
Water-proof: IP68
Video Cable Length: 6m
Power Supply Cable Length: 1.5m
Package weight: about 178g


Installation Guides:
1. Get out the license light;( or install on Pre-setting hole)
2. Get the rear view lens lines across the license light original position;
3. fasten the camera with the buckle which place in the two sides of the camera;
4. Connect the lens built-in license light power lines to the original license light power lines;
5. Connect the reverse lens switching lines;
6. Connect the camera's signal line to the signal extension line;
7. Connect the car's reverse light line to camera's video cable;
8. Check if all lines are correct connected and arranged;
9. Debug the working effects of the camera and the license light;
10. Cover the car trunk. Finished. 


Package Included:
1 * Car Rear View Camera
1 * 6M Video Cable
1 * 1.2M Power Cable
1* gift box