^{Wireless CCD Track Car Rear View Camera For Ford Ecosport 2013 2015 Camera Reverse Backup Camera  Parking Assistance Camera Track Line} Night Vision Waterproof

 

 

 

 

Suitable For Car:

 

 

FOR  Ford Ecosport  2013 2015

 

  

Car Rear View Camera Features:

 

High definition  CCD Track Camera

Color night vision

Wateproof

Shock-proof

170 Degree Wide viewing angle 

Environmental & Durable

1-year warranty to every customer

 

 

Car Rear View Camera Specification:

 

 · Image Sensor: 1/3 "OV Color CCD

 · Horizontal Resolution: 600 TVL

 · Minimum Illumination: 1.0Lux F=1.2 (0Lux with IR on)

 · Night Vision: 5-10meters

 · Lens: 2.8mm

 · Diagonal Viewing Angle: 170 degree 

 · Synchronization: Internal synchronization

 · Signal to noise ratio: >48db

 · Signal System: PAL/NTSC

 · Electronic Shutter: Auto

 · Video Output: RCA interface, 1.0Vp-p, 75Ohm

 · White Balance: Auto

 · Backlight Compensation: Auto

 · Power: DC 12V

 · Current Consumption: 50-60mA, Max 130mA with IR on

 · Operating Temperature: -20C~ +60C, RH95% Max

 · Storage Temperature: -30C ~ +80C, RH95% Max

 

 

Wireless Video Transmitter & Receiver Specification:

 

Easy installation

Take one minute get your camera become a wireless camera

Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)

Work range: up to about 50m (Hollowness)

Fit all RCA composite video connections

Power: DC 12V

Transmitter/Receiver cable length:1.5m

 

 

Package Contents:(Two Choose : A is wire camera , B is wireless camera)

 

Package Contents  A ：Wire Camera

 

1 x Car Rear View Camera

1 x 6M Power & Video Cable

1 x user manual

 

 

Package Contents  B ：Wireless Camera

 

1 x Car Rear View Camera

1 x Wireless Transmitter + Receiver Cable

1 x user manual

How to Install

Take out your stock license plate light at the back of your car.

Fix the camera to where the stock license plate light was.

Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power

Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.

Connect the video cable of the camera to the extension cord.

Connect the extension cord to your car monitor.

You will see the images when your car is in reverse shift.

​How to Install

Take out your stock license plate light at the back of your car.

Fix the camera to where the stock license plate light was.

Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power

Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.

Connect the video cable of the camera to the extension cord.

Connect the extension cord to your car monitor.

You will see the images when your car is in reverse shift.

How to install Wire Camera

How to install Wireless Camera