Car Reverse Rear View Camera Connection Cable for Nissan Leaf e-NV200 with EV GEN1/GEN2 Monitor

Feature Product

• Save by connecting aftermarket car rear view camera without a video interface
• Compatible with Nissan Leaf equipped with EV GEN1 and EV GEN2 multimedia system
• No risk of voiding warranty as the cable offers Plug&Play connection without cutting car wiring
• Image from the camera appears on the screen automatically when you switch to reverse
• Continue using all of the OEM functions as you did before connecting the cable

Description

Cable for rear view camera connection in Nissan Leaf cars with OEM Nissan EV GEN1 and Nissan EV GEN2 multimedia system. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. Dynamic parking lines that will turn with the steering wheel will be displayed on the camera image. Parking lines can be adjusted in the service menu. The device is connected to the 40 pin socket. Depending on your car radio model, this socket may be located in a different place from the one shows in the diagram. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.

Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there's a grey REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu. .

Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.

Compatibility
Additional compatibility condition: Cars manufactured for all EU, USA, JP markets / Head units with and without navigation
Head unit: Clarion with motorized display
Leaf 2010-2017
e-NV200 2014-2017

Note! Only cameras in NTSC format are supported.