Rear View Camera Connection Cable for Honda Accord, Crosstour, Odyssey with Honda i-MID 8" Montior

Feature Product

• Save by connecting aftermarket car rear view camera without a video interface
• Compatible with Honda, equipped with 8" i-MID monitors
• No risk of voiding car warranty as the cable offers simple Plug&Play connection without the need to cut car wiring
• Image from the camera appears on the screen automatically when you switch to reverse
• Continue using all of the OEM functions as you did before connecting the cable

Description

This cable allows you to connect rear view cameras in Honda cars with OEM Honda i-MID 8" monitor. The cable offers Plug&Play installation of aftermarket cameras without damaging the OEM wiring.

Image from the rear view camera will be automatically displayed on the screen when reversing. Active parking guidelines will be shown on top of the rear view camera image (PAS function should be activated in the service menu). The device is connected to the 24 pin socket.

Note! Power of the additional rear view camera should be taken from the ACC line (second key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +8 V output voltage of the monitor may be used. If the camera requires more than +8 V it should be connected to the ACC line.

Note! Self-diagnostics should be run from the service menu of the head unit after the camera has been connected so that the camera is recognized by the car system.

Compatibility
Accord 2013-
Accord Coupe 2013-
Accord Hybrid 2015-
Accord LX 2013-
Accord Plug-In 2014-
Accord PHEV 2014-
Crosstour 2013-
Odyssey 2013-
Odyssey Touring 2014-
Additional compatibility condition
OEM 8" Honda i-MID monitor without touch

Note! Only cameras in NTSC format are supported.